Sorry, an unexpected error occurred whilst gathering information for the Auto Setup process.
Try Auto Setup again after restarting your ^p.
Sorry, an error occurred whilst reverting to your previous license.
Restart the ^p and try again.
Your previous license will now be reverted.
When the ^p is restarted you will be able to attempt to verify your purchase again.
There is no Vicomsoft Server product running on this machine.
Sorry, your previous license could not be reverted.
Your purchase has been successfully verified.
You should create a backup copy of your license file and add ‘.bak’ to the end of the file name.
Sorry, I was unable to start this operation automatically.
Please launch your web brower and point it to the url which has been placed in your clipboard.
Your ^p cannot be switched on with no ports defined, and this is necessary to perform this operation.
Your ^p must be switched on to perform this operation.
Shall I do this for you?
Sorry, the details you have entered do not appear to be correct.
Please re-enter them carefully.
Sorry, the Modem Control Panel could not be opened.
Try again from the Finder when Auto Setup has completed.
Are you sure you want to delete this port?
WARNING!
Serving DHCP on a NAT port may cause problems outside your network.
Your VICOM TCP/IP Preferences file has been updated.
The original file has been saved as “VICOM TCP/IP Preferences.old”.
If you wish to revert to your previous version, use a copy of the backup file and remove the “.old” from its name.
Sorry, the CyberNOT database you have installed is incompatible with this version.
Please upgrade your CyberUpdater software.
The two IP addresses you have entered are not on the same network.
Please try again.
You must enter a password prompt.
Please try again.
You must enter a user name prompt.
Please try again.
The IP address you have entered is invalid.
Please try again.
You must enter your password.
Please try again.
You must enter your user name.
Please try again.
You must enter the telephone number of your ISP.
Please try again.
Sorry, there is not enough to do this. Try closing some windows.
Network Address Translation is not available for the Answer Only connection type.
The Network Address Translation checkbox in the General panel has therefore been switched off.
WARNING!
This port’s method is unavailable.
The next available method has been selected automatically.
Are you sure you want to change this Mac's TCP/IP address to be the same as the selected Port?
Changing this address may disrupt existing connections to this machine, and you may need to relaunch active TCP/IP applications.
Sorry, this version of ^p is restricted for use only when a Hermstedt ISDN card is installed.
Please conact your supplier for further information.
The ^p cannot be started.
Please try increasing the amount of memory allocated to the application and then restart the ^p.
Failed to connect to the remote machine!
The local connection will be now be re-established.
Sorry, the CyberUpdater application failed to start because it is in the Trash.
Move it out of the Trash and try again.
Sorry, this operation failed because of an unknown error.
Sorry, this operation failed because an invalid port id was specified.
Sorry, this operation failed because no more ports of this type can be created.
Sorry, this operation failed because the slot specified for this port is already in use.
Sorry, this operation failed because an invalid method was selected.
Sorry, this operation failed because the specified CTB tool and/or the default CTB tool could not be found.
Sorry, there was insufficient memory to complete this operation.
Operation timed out
A Domain Name Entry…
Must not start or end with a period
Must not contain adjacent periods
Must contain at least two segments
This field must contain IP Addresses in the format ‘nnn.nnn.nnn.nnn’ where 'nnn' should be a number in the range 0 to 255
Sorry, the Internet Filters data cannot presently be remotely managed.
Enter a host name to test with the currently configured filters…
NOTE: Protocol blocks cannot be tested.
The CyberNOT filter is not installed and so CyberNOT filtering cannot be enabled.
Select the CyberNOT panel in the Internet Filters window and press the ‘Download’ button.
The CyberNOT filter did not load and so CyberNOT filtering cannot be enabled.
An attempt to make a connection to the entered host WOULD NOT be allowed according to the CyberNOT filter.
An attempt to make a connection to the entered host WOULD be allowed, but the CyberNOT filter was not checked because it is not currently loaded.
To use the CyberNOT filter, please quit the ^p, increase its memory in the Finder‚Ñ¢ and relaunch.
To use the CyberNOT filter, the application memory allocation will be increased and the ^p must be restarted.
The CyberNOT filter can only be updated if the ^p is on and has access to the Internet.
To use the CyberNOT filter, the application memory allocation will be increased, and the ^p will have to be restarted
Sorry, the CyberUpdater application failed to start.
Try launching it from the Finder‚Ñ¢ or reinstall this software from the master disks.
Sorry, I couldn’t increase the ^p memory allocation automatically.
Please quit the ^p, increase its memory in the Finder‚Ñ¢ and relaunch.
To use the CyberNOT filter, the ^p will have to be restarted when the update is complete, as the application memory allocation will be increased
Are you sure you want to do this?
To update and use the CyberNOT filter, all filters will be turned off and the ^p will have to be restarted when the update is complete, as the application memory allocation will be increased.
Are you sure you want to do this?
To update the CyberNOT filter, all filters will be turned off now and then restarted when the update is complete!
Are you sure you want to do this?
Sorry, the CyberUpdater application cannot be found on your Macintosh.
Please reinstall this software from the master disks.
Can’t connect to remote Gateway. Please make sure you’ve entered the correct IP address.
Your username and/or password have not been accepted.
You do not have permission to carry out the requested operation.
The requested operation has failed.
Sorry, the -Gateway- extension is either missing from your System Folder, is too old or did not load at startup and so this software cannot operate.
Try restarting your Mac or re-installing your Vicomsoft Software.
Sorry, the -Gateway- extension in your System Folder did not load at startup and so local TCP/IP applications cannot use the ^p.
If you wish to correct this, try restarting your Mac.
Sorry, the -Gateway- extension in your System Folder is too old and so local TCP/IP applications cannot use the ^p.
If you wish to correct this, reinstall the Vicomsoft software.
Sorry, the -Gateway- extension is missing in your System Folder and so local TCP/IP applications cannot use the ^p.
If you wish to correct this, reinstall the Vicomsoft software.
Cannot access the TCP/IP Preferences so local TCP/IP applications cannot use the ^p.
The TCP/IP Control Panel could not be opened for an unknown reason.
Open the TCP/IP Control Panel manually, make the required changes and then try again.
The “VICOM” configuration could not be corrected.
Do you want to open the TCP/IP Control Panel or continue regardless?
It has been detected that the “VICOM” configuration in the TCP/IP Control Panel has been modified and so local TCP/IP applications cannot use the ^p.
Connection to remote Gateway has been lost
This Macintosh must have a valid (non-dynamic) address before you can connect to a remote Gateway.
Save changes to the User list before closing?
Can’t connect to remote Gateway
Please connect to a remote Gateway before doing this operation.
This user name already exists.
The subnet mask must be non zero. The default subnet mask for the range has now been placed here.
The 'to' range must be higher than the 'from' range. The next available address has now been placed here.
The 'to' range must be non zero. The first available address has now been placed here.
The 'from' range must be non zero.
Sorry, no Keyspan serial card could be found. The software will operate in demo mode.
Sorry, the “Apple Modem Tool” is not available, and it is required to run AutoConfigure.
Sorry, ^p can’t detect any Ethernet connections, and they are required to run AutoConfigure.
Can’t set Open Transport to use ^p. If you wish to run TCP/IP applications on this Macintosh please open the “TCP/IP” Control Panel and select the “VICOM” configuration.
Quitting the program will disconnect all users and stop all TCP/IP services. Do you want to continue ?
A wildcard entry containing only ‘*’ is reserved and cannot be entered.
Use the ‘All unspecified hosts’ menu to specifiy ‘All Hosts’
All hosts WOULD be allowed because all filters are currently INACTIVE!
An attempt to make a connection to the entered host WOULD NOT be allowed.
An attempt to make a connection to the entered host WOULD be allowed.
Enter a host name to test with the currently configured filters…
The entered text doesn’t contain any wild card characters and is therefore in the wrong list, however an identical entry already exists in the correct list.
Would you like to delete this entry?
The entered text contains wild card characters and is therefore in the wrong list, however an identical entry already exists in the correct list.
Would you like to delete this entry?
The entered wild card already exists.
Would you like to delete the entry?
The entered host name already exists.
Would you like to delete the entry?
The entered text doesn’t contain any wild card characters and is therefore in the wrong list.
Would you like the text to be insered into the appropriate list?
The entered text contains wild card characters and is therefore in the wrong list.
Would you like the text to be insered into the appropriate list?
The timeout value must be at least 1 minute. Please reenter.
The MTU value must be between 200 and 1500. Please reenter.
Sorry, the PowerPC-native version of this product requres Open Transport to work.
Your “-Gateway-” extension is too old. Please replace it with an updated version.
Sorry, MacTCP/Open Transport ports can’t be edited or viewed
Running the autoconfigurator on the ^p will clear all current settings?
Do you wish to delete all ports and re-configure the ^p?
Sorry, the details you have entered do not appear to be correct.
Please re-enter them carefully.
The entered password and verify password are not identical. Please re-enter your password carefully.
One of the configured ports failed to initialise correctly.
The ^p preferences may not be edited while the ^p is active.
Please stop the gateway before editing gateway preferences.
